Professional Sp
!

CITRONIC CX-3008M ULTIMA PROFESSIONAL SERIES SPEAKER

Larger picture
170.220  Citronic CX-3008M Ultima Professional Series Speaker 300W RMS

A dual angle floor wedge fitted with a top hat enabling it to be

used also as a pole mounted top box. Using this option for main PA

as well as floor wedges gives the whole system the same sound signature

greatly reducing EQ problems hence simplifying the set-up for bands

with no dedicated sound engineer. The enclosure is made from premium

Russian ply with custom drive units which give a wide bandwidth and an

exceptionally smooth response, making it ideal for the demands of

today’s modern programme material. Industry standard

flying points are fitted as standard for ease of installation and integration into multiple arrays.

Its computer-aided design ensures accurate tuning of enclosures for maximum

output and tailored bottom response. Great attention has also been given to panel bracing

to reduce resonances so increasing sonic definition and authority.

  • Durable textured black paint finish
  • 12 x M10 hanging points
  • Powerful low frequency, rich elasticity, crisp vocal penetration
  • Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection
  • Speakon® plugs fitted for reliability and maximum power transfer from the amplifier
  • Top hat fitted for maximum versatility in mixing and matching enclosures
  • All fittings rebated for easier stacking and arraying
  • Steel bar handles fitted as standard

CITRONIC CX-1000B ULTIMA PROFESSIONAL SERIES SPEAKER

Larger picture
170.217 Citronic CX-1000B Ultima Professional Series Speaker 1000W RMS

A high energy transmission direct low frequency speaker enclosure

made from premium Russian ply with custom drive units which give a

wide bandwidth and an exceptionally smooth response,

making it ideal for the demands of today’s modern programme material.

Industry standard flying points are fitted as standard for

ease of installation and integration into multiple arrays.

Its computer-aided design ensures accurate tuning of enclosures for maximum output

and tailored bottom response. Great attention has also been given to

panel bracing to reduce resonances so increasing sonic definition and authority.

 

  • Durable textured black paint finish
  • 16 hanging points
  • Pure and powerful low frequency producing high sound pressure
  • Coated steel grille with lined with special material to prevent ingress of foreign particles for maximum protection
  • Speakon® connectors fitted for reliability and maximum power transfer from the amplifier
  • Top hat fitted for maximum versatility in mixing and matching enclosures
  • All fittings rebated for easier stacking and arraying
  • Steel bar handles fitted as standard http://avslgroup.com/manuals/100/170211.pdf

CITRONIC CX-6004 ULTIMA PROFESSIONAL SERIES SPEAKER

Larger picture

170.223  Citronic CX-6004 Ultima Professional Series Speaker

A full range speaker enclosure made from premium Russian ply with custom drive units

which give a wide bandwidth and an exceptionally smooth response,

making it ideal for the demands of today’s modern programme material.

Industry standard flying points are fitted as standard for ease of

installation and integration into multiple arrays.

Its computer-aided design ensures accurate tuning of enclosures for maximum output

and tailored bottom response.

Great attention has also been given to panel bracing to reduce resonances

so increasing sonic definition and authority.

  • Durable textured black paint finish
  • 12 hanging points
  • Powerful low frequency, rich elasticity, crisp vocal penetration
  • Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection
  • Active electronic protection fitted to prevent overload to H.F. units
  • Crossovers optimally designed to give smooth and balanced integration of drivers
  • Speakon® connectors fitted for reliability and maximum power transfer from the amplifier
  • All fittings rebated for easier stacking and arraying
  • Steel bar handles fitted as standard

CITRONIC CX-9004 ULTIMA PROFESSIONAL SERIES SPEAKER

Larger picture
170.214   Citronic CX-9004 Ultima Professional Series Speaker 900W RMS

A full range speaker enclosure made from premium Russian ply

 with custom drive units which give a wide bandwidth and an exceptionally smooth response,

making it ideal for the demands of today’s modern programme material.

Industry standard flying points are fitted as standard for ease of

installation and integration into multiple arrays.

Its computer-aided design ensures accurate tuning of enclosures for maximum output and tailored bottom response.

Great attention has also been given to panel bracing to reduce resonances so increasing sonic definition and authority.

  • Durable textured black paint finish
  • 12 hanging points
  • Powerful low frequency, rich elasticity, crisp vocal penetration
  • Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection
  • Active electronic protection fitted to prevent overload to H.F. units
  • Crossovers optimally designed to give smooth and balanced integration of drivers
  • Speakon® connectors fitted for reliability and maximum power transfer from the amplifier
  • All fittings rebated for easier stacking and arraying
  • Steel bar handles fitted as standard

CITRONIC CX-3008 ULTIMA PROFESSIONAL SERIES SPEAKER

Larger picture
170.209  Citronic CX-3008 Ultima Professional Series Speaker 300W RMS

A full range speaker enclosure made from premium Russian ply

with custom drive units which give a wide bandwidth and an exceptionally smooth response,

making it ideal for the demands of today’s modern programme material.

Industry standard flying points are fitted as standard for ease of

installation and integration into multiple arrays.

Its computer-aided design ensures accurate tuning of enclosures for

maximum output and tailored bottom response.

Great attention has also been given to panel bracing to reduce resonances

so increasing sonic definition and authority.

  • Durable textured black paint finish
  • 12 hanging points
  • Powerful low frequency, rich elasticity, crisp vocal penetration
  • Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection
  • Active electronic protection fitted to prevent overload to H.F. units
  • Crossovers optimally designed to give smooth and balanced integration of drivers
  • Speakon® connectors fitted for reliability and maximum power transfer from the amplifier
  • Top hat fitted for maximum versatility in mixing and matching enclosures
  • All fittings rebated for easier stacking and arraying
  • Steel bar handles fitted as standard

CITRONIC CX-5008 ULTIMA PROFESSIONAL SERIES SPEAKER

Larger picture
170.211 Citronic CX-5008 Ultima Professional Series Speaker 500W RMS

A full range speaker enclosure made from premium Russian ply

with custom drive units which give a wide bandwidth and an

exceptionally smooth response, making it ideal for the demands of today’s

 modern programme material.

Industry standard flying points are fitted as standard for ease of installation

and integration into multiple arrays.

Its computer-aided design ensures accurate tuning of enclosures for maximum output

and tailored bottom response. Great attention has also been given

to panel bracing to reduce resonances so increasing sonic definition and authority.

  • Durable textured black paint finish
  • 12 hanging points
  • Powerful low frequency, rich elasticity, crisp vocal penetration
  • Coated steel grille lined with special material to prevent ingress of foreign particles for maximum protection
  • Active electronic protection fitted to prevent overload to H.F. units
  • Crossovers optimally designed to give smooth and balanced integration of drivers
  • Speakon® connectors fitted for reliability and maximum power transfer from the amplifier
  • Top hat fitted for maximum versatility in mixing and matching enclosures
  • All fittings rebated for easier stacking and arraying
  • Steel bar handles fitted as standard http://avslgroup.com/manuals/100/170211.pdf

300 watt RMS NJD Trapezoidal

Larger picture

Part Number NJ561

300 watt RMS Trapezoidal Full Range Cab

A professional speaker cabinet incorporating a symbiosis of cabinet,

driver and cross overdesign to provide.

The cabinet is made of high grade components and is fitted with

Celestion CDX-1425 compression driver, constant directivity

H1-9040-P horn flare and a Celestion 1525E main driver.

The arrangement is complemented by a crossover

designed to henhance the preformance and durability of the speaker cabinet.

Finished in Grey/black carpet with tough metal corners and rattle resistant metal grill.

Cross over frequency 2500 Hz

Bass driver 380mm

Compression Driver  25.5mm

Impedance   8 Ohm

Sensitivity 98db

Power  300 watt RMS

Dimm  340 x 450 x 630mm

NJD Bass 300 watt RMS

Larger picture

Stock Number NJ562

300 Watt RMS Bass speaker 380mm SP

 

A professional speaker cabinet incorporating a symbiosis of cabinet,

driver and cross overdesign to provide. the user with truly professional product. 

The cabinet is made of high grade components and is fitted with Celestion CDX-1530E Bass driver.

The arrangement is complemented by a crossover designed to henhance the preformance

and durability of the speaker cabinet. Finished in Grey/black carpet with

 tough metal corners and rattle resistant metal grill.

Colour Grey

Connector  2 x 4 Pole connector

Cut off frequency 160 Hz

Bass driver 380mm

Impedance    8 Ohm

Sensitivity 99db @ 1 meter

Power 300 watt Rms

Dimm 480 x 500 x 680mm

300watt RMS Full Range NJD Sp

Larger picture

Part Number NJ560 300 watt Rms

300mm Trapezoidal Full Range Speaker

 

A professional speaker cabinet incorporating a symbiosis of cabinet,

 driver and cross overdesign to provide.

The cabinet is made of high grade components and is fitted with

Celestion CDX-1425 compression driver, constant directivity

H1-9040-P horn flare and a Celestion 1525E main driver.

The arrangement is complemented by a crossover designed to

henhance the preformance and durability of the speaker cabinet.

Finished in Grey/black carpet with tough metal corners and rattle resistant metal grill.

300 watt Monitor Speaker cab

Larger picture
Part number NJ563 300 watt speaker cab Full range

N12300W 300MM 300W MONITOR SPEAKER CABINET FULL RANGE

 

A professional speaker cabinet incorporating a symbiosis of cabinet,

driver and crossover design to provide the user with a truly professional product.

The cabinet is made from high grade components and is fitted with a

Celestion CDX1 -1425 compression driver, constant directivity

Hi -9040-P horn flare and a Celestion 1225E main driver.

The arrangement is complemented by a crossover designed to enhance

the performance and durability of the speaker cabinet.

Finished in grey/black carpet with tough metal corners and rattle resistant metal grill.

            Colour                                                                                       Grey

            Connector                                                                                       2 x 4 Pole connector

            Crossover Freq                                                                          3000Hz

            Bass Driver                                                                                                                                                                                                                                 300mm

            Compression Driver                                                                25.5mm

            Impedance                                                                                    80

       Sensitivity                                                                                98db@lm

Power                                                                                                     300W(RMS)

NJD NI12300 birch ply cab

Larger picture

Order code NI2300 Birch wood ply

300 watt RMS 300 mm driver.

NI12300 PAINTED BIRCH PLY

TRAPEZOIDAL SPEAKER CABINET

A professional speaker cabinet incorporating a

symbiosis of cabinet, driver and crossover design to provide the user with a

truly professional product. The cabinet is made from high quality birch ply and is

fitted with a Celestion CDX1 -1425 compression driver, constant directivity

H1-9040-P horn flare, Celestion 1225E main driver, box handles and flying points for ceiling hanging.

The arrangement is complemented by a crossover designed to enhance the performance

and durability of the speaker cabinet.

Finished in a high quality grey/black paint with tough rattle resistant metal grill.

 

Colour                                                                                         Grey/black

Connector                                                                       2 x 4 Pole connector

Cut Off Freq                                                                                       300Hz

Bass Driver                                                                                       300mm

Compression Driver                                                                          25.5mm

Impedance                                                                                               80

Sensitivity                                                                                      98db@lm

Power                                                                                         300W(RMS)

Frequency Response                                                                      40-20000Hz

Packing                                                                                        Export box

Brand                                                                                                   NJD

Dims         370 x 370 x 600m

NJD speaker cab 380 driver 600 watt

Larger picture

Order code N115300 Birchwood cab 300 watt RMS

Manual http://www.electrovision.co.uk/technical/520.pdf

N115300 PAINTED BIRCH PLY TRAPEZOIDAL SPEAKER CABINET

A professional speaker cabinet incorporating a symbiosis of cabinet,

driver and crossover design to provide the user with a truly professional product.

The cabinet is

made from high quality birch ply and is fitted with a Uelestion

 UIJX1 -1425 compression driver, constant directivity Hi -9040-P horn flare,

Celestion 1525E main driver, box handles and flying points for ceiling hanging.

The arrangement is complemented by a crossover designed to enhance the performance

and durability of the speaker cabinet. Finished in a high quality grey/black paint with tough rattle resistant metal grill.

 

Colour                                                                                          Grey/black

Connector                                                                         2 x Pole connectors

Crossover Freq                                                                                    250Hz

Bass Driver                                                                                        380mm

Compression Driver                                                                           25.5mm

Impedance                                                                                                80

Sensitivity                                                                                    98db@ 1 m

Power                                                                                          300W(RMS)

Frequency Response                                                                    40-20000Hz

Packing                                                                                         Export box

Brand                                                                                                    NJD

Dims         340x450x630mm

NJD Bass 400 watt box Birch Ply

Larger picture

Order code N115300b 400 Watt RMS Bass cab

Birch wood Maual http://www.electrovision.co.uk/technical/520.pdf

N115300B PAINTED BIRCH PLY BASS SPEAKER CABINET

 

A professional speaker cabinet incorporating a symbiosis of cabinet,

driver and crossover design to provide the user with a truly professional product.

The cabinet is made from high quality birch ply and is fitted with a

Celestion 1530E main driver,box handles and flying points for ceiling hanging.

The arrangement is complemented by a crossover designed to

enhance the performance and durability of the speaker cabinet.

Finished in a high quality grey/black paint with tough raffle resistant metal grill.

 

Colour                                                                                             Grey/black

Connector                                                                      2 x 4 Pole connectors

CutOff Freg                                                                                         160Hz

Bass Driver                                                                                        380mm

Impedance                                                                                                80

Sensitivity                                                                                    99db@ 1 m

Power                                                                                          400W(RMS)

Packing                                                                                   Export packing

Brand                                                                                                    NJD

 Dims                                                                               480 x 500 x 680mm