LA-600 3 CHANNEL LOOP AMPLIFIER - 600m²
Inductive loop amplifiers are a must for modern PA installations to give equal access to information and announcements to people with hearing disability by transmitting audio signals to hearing aids fitted with a "T" switch. Designed to compliment the Adastra 900 series mixer amplifiers. Ideal for use in churches, theatres, conference rooms, museums and waiting rooms etc.
- Each channel accepts input via XLR, 6.3mm Jack or RCA phono
- Inputs switchable between mic and line with optional phantom power +40Vdc
- Built-in siren for evacuation alert
- Tamper proof channel volume, bass & treble and loop current level controls
- Peak current LED indication
- AGC (automatic gain control)
- 19" Rack mountable
-
Power |
230Vac, 50Hz, (150W) |
Frequency response |
50Hz-5kHz±3dB. |
THD |
<1% |
Input sensitivity:Line |
-6dBu/6k ohm |
Input sensitivity:Mic |
-56dBu/2k ohms |
Signal to noise ratio |
75dB (line), 60dB (mic) |
Dimensions |
430 x 280 x 88mm (2U) |
Weight |
7.2kg |
- It is important to use a loop cable that is capable of carrying the current that this amplifier produces. The table below is a guide to the maximum loop length for each cable thickness
-
Cable Ø |
1.0mm² |
1.5mm² |
2.5mm² |
4.0mm² |
Total loop length |
< 60m |
< 110m |
< 200m |
> 200m |
!
<< Back
|
|