Ultimax Mobile Rig
A heavy duty rigging concept for mobile or install use. It offers a cost effective alternative to traditional trussing & as well as being cheaper, offers one other major advantage - it packs flat! it suitable for most DJ uses & provided it is supported at sufficient intervals, mobile rig can be joined for as long as it is required. Simple Male/Female configuration ensures rapid set up. For long runs, purchase Male sections & finish with a Female section. It is manufactured from a 25mm steel section so it will accept either of the Ultimax GC25 G clamps. It fixes to 32mm diameter tripods by Ultimax closed castings (CLOSCAST). These castings can be permanently fixed to the mobile rig if required. This simply requires the removal of one of the spacer tubes, which is replaced with a closed casting & a small spacer (MOBSPC1 - available separately). A simple, strong hinge (MOBHING) is available for installation purposes
