!

Low impedance horn, 8 Ohm, 25W rms

!

LOW IMPEDANCE HORN 25 WATT RMS

An all metal range of low impedance round PA horns for general purpose and contract industrial installations. Made from aluminium and fitted with sturdy steel adjustable mounting brackets and a length of good quality two core speaker cable.

8 Ohm imp

Low impedance horn, 8 Ohm, 40W rms

!

LOW IMPEDANCE HORN 40 Watt

An all metal range of low impedance round PA horns for general purpose and contract industrial installations. Made from aluminium and fitted with sturdy steel adjustable mounting brackets and a length of good quality two core speaker cable.

Impedance 8 ohms
Type Low impedance

100V line horn, 30W rms

!

100V LINE HORN SPEAKER 30 Watt

Round horn PA speakers offering high durability and performance making them ideal for general purpose and industrial use. The horn flare is made from aluminium and is fitted with a rubberised edge protector, whilst the centre cone and watertight transformer housing are made from tough ABS. The horns are also fitted with a sturdy adjustable mounting bracket and a length of 3 core double insulated connecting cable. Wattage tappings are selected by an integral rotary switch.

100V line horn, 15W rms

!

Please call for stock 

100V LINE HORN SPEAKER 15 Watt

Round horn PA speakers offering high durability and performance making them ideal for general purpose and industrial use. The horn flare is made from aluminium and is fitted with a rubberised edge protector, whilst the centre cone and watertight transformer housing are made from tough ABS. The horns are also fitted with a sturdy adjustable mounting bracket and a length of 3 core double insulated connecting cable. Wattage tappings are selected by an integral rotary switch.

Heavy duty rectangular horn speakers, 100V line, 25W rms

!

HEAVY DUTY RECTANGULAR HORN SPEAKER 25 watts 100 volt line

A proven and long established range of heavy duty, high quality rectangular PA horn speakers. Made from robust, virtually indestructible ABS material offering maximum protection against shock and weather, making them ideal for mounting in extreme conditions, whether on vehicles, boats or in exposed outdoor installations; IP rating 66. All have a sturdy, 270° adjustable mounting bracket and a 60cm length of double insulated connecting cable. All models are fitted with high quality aluminium voice coils offering high acoustical properties and reliability. 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.

Heavy duty rectangular horn speakers, 100V line, 15W rms

!

HEAVY DUTY RECTANGULAR HORN SPEAKER

A proven and long established range of heavy duty, high quality rectangular PA horn speakers. Made from robust, virtually indestructible ABS material offering maximum protection against shock and weather, making them ideal for mounting in extreme conditions, whether on vehicles, boats or in exposed outdoor installations; IP rating 66. All have a sturdy, 270° adjustable mounting bracket and a 60cm length of double insulated connecting cable. All models are fitted with high quality aluminium voice coils offering high acoustical properties and reliability. 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch

Heavy duty rectangular horn speakers, 8 Ohm, 15W rms

!

HEAVY DUTY RECTANGULAR HORN SPEAKER 15watt

A proven and long established range of heavy duty, high quality rectangular PA horn speakers. Made from robust, virtually indestructible ABS material offering maximum protection against shock and weather, making them ideal for mounting in extreme conditions, whether on vehicles, boats or in exposed outdoor installations; IP rating 66. All have a sturdy, 270° adjustable mounting bracket and a 60cm length of double insulated connecting cable. All models are fitted with high quality aluminium voice coils offering high acoustical properties and reliability. 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.

ROUND HORN SPEAKER 30 watt

!

HEAVY DUTY ROUND HORN SPEAKER 30 watt 

A long established range of heavy duty, high quality circular PA horn speakers. Made from virtually indestructible ABS material offering maximum protection against shock and weather making them ideal for mounting in extreme outdoor conditions; IP rating 66. All horns are fitted with a sturdy, 270° adjustable mounting bracket and a 60cm length of double insulated connecting cable. All models are fitted with high quality aluminium voice coils which offer high acoustical properties and reliability. 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.

ROUND HORN SPEAKER 25 watt

!

HEAVY DUTY ROUND HORN SPEAKER 25 Watt speakers 

A long established range of heavy duty, high quality circular PA horn speakers. Made from virtually indestructible ABS material offering maximum protection against shock and weather making them ideal for mounting in extreme outdoor conditions; IP rating 66. All horns are fitted with a sturdy, 270° adjustable mounting bracket and a 60cm length of double insulated connecting cable. All models are fitted with high quality aluminium voice coils which offer high acoustical properties and reliability. 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.

Piezo horn driver, heavy duty version - 10cm, 160W max

!
Larger picture 
Part Number 902.490   Piezo horn driver, heavy duty version - 10cm, 160W max

PIEZO HORN DRIVERS

Ensuring a perfect reproduction of the high frequencies. Due to the high efficiency of the piezo system, the amplifier is hardly loaded. For use with the separately available reflection horn with 1 3/8" thread connection.

  • Highly efficient Piezo system
Impedance 1k ohms @ 1kHz
Impedance 50 ohms @ 25kHz
Frequency response 3kHz – 29kHz

Dual piezo horn tweeter

!
Larger picture 
Part Number 902.484    Dual piezo horn tweeter

DUAL PIEZO HORN TWEETER

Special dual piezo high impedance horn tweeter. featuring high efficiency without loading the amplifier too much. Can be connected easily via a small series resistance without special filter. Crisp, clean reproduction of the high frequencies.

Dimensions 95 x 162 x 105mm
Frequency response 3kHz - 32kHz
Impedance:30kHz 40 ohms
Impedance:1kHz 1k ohms

Compression horn driver, 8 Ohms, 120W max, 13cm

!
Larger picture 
Part Number 902.415  Compression horn driver, 8 Ohms, 120W max, 13cm

COMPRESSION HORN DRIVER UNITS

Special high frequency drivers for separately available reflector horns fitted with 1 3/8" thread. The drivers must be connected via a filter. Crisp clean high frequencies.

  • Titanium diaphragm
  • Kapton bobbin
  • Copper clad aluminium voice coil

Compression horn driver, 8 Ohms, 100W max, 11.5cm

!
Larger picture 
Part Number 902.412    Compression horn driver, 8 Ohms, 100W max, 11.5cm

COMPRESSION HORN DRIVER UNITS

Special high frequency drivers for separately available reflector horns fitted with 1 3/8" thread. The drivers must be connected via a filter. Crisp clean high frequencies.

  • Titanium diaphragm
  • Kapton bobbin
  • Copper clad aluminium voice coil

Compression horn driver, 8 Ohms, 80W max, 10cm

!
Larger picture 
Part Number 902.409    Compression horn driver, 8 Ohms, 80W max, 10cm

COMPRESSION HORN DRIVER UNITS

Special high frequency drivers for separately available reflector horns fitted with 1 3/8" thread. The drivers must be connected via a filter. Crisp clean high frequencies.

  • Titanium diaphragm
  • Kapton bobbin
  • Copper clad aluminium voice coil

TWEETER BOX

!
Larger picture 
Part Number 170.780 Tweeter box

High frequency top box with 2 bullet piezo tweeters and one piezo horn for a perfect reproduction of high frequencies. Housed in a robust black carpet covered case with metal protected corners.

  • Fitted with 35mm top-hat
  • Designed for use with a subwoofer
  • Screw terminals and 6.3mm speaker connections
  • Fitted with carry handle
Voltage 35V
Power max. 150W @ 4 ohms, 100W @ 8 ohms
Dimensions 235 x 490 x 345mm
Weight 13kg
Frequency response 1kHz - 18kHz
SPL @ 1W/1m 91dB
SPL max 102dB

Ceiling/wall speaker white, 2-way, 50W max.

!

IN WALL/CEILING SPEAKER

A 2-way speaker with a built in crossover, 13cm (5") woofer with polypropylene cone and foam rubber surround to minimize distortion. The housing is made from white ABS with a rigid steel grille also in white to sit discretely in a wall or ceiling.

  • 2-way speaker
  • 13cm (5") woofer
  • 4cm (1.75") poly-carbonate tweeter
  • Quick fit system
  • Fitted with attractive metal grille
  • Spring terminal connections
  • Power max. 50W
    Frequency response 100Hz - 17kHz
    Impedance 8 ohms
    Mounting dimensions 205 x 140 x 52mm

     

    System 2-way
    Dimensions 235 x 170mm
    Weight 1.6kg

    6.5 100 watt ceiling speaker

    !
    Larger picture 
    Part Number 125.061
    125.061 Water resistant speaker, 16.5cm (6.5"), 100W max, 4 Ohms, White

    per pair

    WATER RESISTANT SPEAKERS

    A range of water resistant speakers for panel mounting. 4 ohms are ideal for marine use. 8 ohms are suitable for PA installations such as swimming pool areas, bathrooms etc.

    • 2-way speakers
    • 5cm (2") tweeter with mylar cone
    • IP35 rated
    • Spade terminal connections
    • Woofer with polypropylene cone
    • Built in crossover
    • Includes fixing kit
    • 2-way speakers
    • Size 16.5cm (6.5")
      Power rms 40W
      Power max 100W
      Impedance 4 ohms
      Frequency response 80Hz - 20kHz
      Tweeter 50mm (2")
      SPL @ 1W/1m 87dB
      Temperature 85°C max, 20°C min
      Humidity 95% max
      Magnet weight 221g (7.8oz)
      Mounting depth 65mm
      Cutout 132mmØ

    6.5" 100 watt ceiling speaker

    !
    Larger picture 
    Part Number 125.063
    125.063 Water resistant speaker, 16.5cm (6.5"), 1000W max, 8 Ohms, White

     per pair

    WATER RESISTANT SPEAKERS

    A range of water resistant speakers for panel mounting. 4 ohms are ideal for marine use. 8 ohms are suitable for PA installations such as swimming pool areas, bathrooms etc.

    • 2-way speakers
    • 5cm (2") tweeter with mylar cone
    • IP35 rated
    • Spade terminal connections
    • Woofer with polypropylene cone
    • Built in crossover
    • Includes fixing kit
    • 2-way speakers
    • Size 16.5cm (6.5")
      Power rms 40W
      Power max 100W
      Impedance 8 ohms
      Frequency response 80Hz - 20kHz
      Tweeter 50mm (2")
      SPL @ 1W/1m 87dB
      Temperature 85°C max, 20°C min
      Humidity 95% max
      Magnet weight 221g (7.8oz)
      Mounting depth 65mm
      Cutout 132mmØ

    WATER RESISTANT SPEAKERS 6 by 9

    !
    Larger picture 
    Part Number 125.072 6"x 9" 2-Way Flush Mount Speakers,Water Resistant, 4 Ohms

    A pair of 2-way water resistant speakers with 15 x 23cm (6 x 9”) oval polypropylene cone, and 5cm (2”) tweeter. The chassis is styled from tough polymer with a foam rubber waterproof seal. Ideal for marine use or PA applications in areas such as swimming pools or bathrooms.

    • IP34 rated
    • Available in 4 or 8 ohms
    • Ideal for marine use or PA applications in swimming pools, bathrooms, patios etc
    • White polymer weatherproof basket
    • Complete with fixing clips and screws
    Dimensions 267 x 188 x 113mm
    Power max. 120W
    Power rms 50W
    Weight 1.35kg
    Frequency response 60Hz - 20kHz
    Woofer 150 x 225mm (6 x 9")
    SPL @ 1W/1m 89dB (±2dB)
    Tweeter 12.5mmØ (0.5")
    Humidity max. 95%
    Mounting depth 85mm

    WATER RESISTANT 6 by 9 SPEAKERS

    !
    Larger picture 
    Part Number 125.075 6"x 9" 2-Way Flush Mount Speakers, Water Resistant, 8 Ohms

    A pair of 2-way water resistant speakers with 15 x 23cm (6 x 9”) oval polypropylene cone, and 5cm (2”) tweeter. The chassis is styled from tough polymer with a foam rubber waterproof seal. Ideal for marine use or PA applications in areas such as swimming pools or bathrooms.

    • IP34 rated
    • Available in 4 or 8 ohms
    • Ideal for marine use or PA applications in swimming pools, bathrooms, patios etc
    • White polymer weatherproof basket
    • Complete with fixing clips and screws
    Dimensions 267 x 188 x 113mm
    Power max. 120W
    Power rms 50W
    Weight 1.35kg
    Frequency response 60Hz - 20kHz
    Woofer 150 x 225mm (6 x 9")
    SPL @ 1W/1m 89dB (±2dB)
    Tweeter 12.5mmØ (0.5")
    Humidity max. 95%
    Mounting depth 85mm