!
!

3-CHANNEL SOUND TO LIGHT
!
160_376
Larger picture 
3-CHANNEL SOUND TO LIGHT
  • Composed of 6 individual lamp modules (2 per channel) and a 3-channel controller module
  • Sound activated via a built-in microphone
  • Individual channel sensitivity controls, low, mid and high
  • On/Off switch fitted
  • Supplied with 6 coloured reflector lamps
  • Packed in a see-through gift box
Power supply 230Vac, 50Hz
Lamp R80, 60W max.
Controller 3 x 120W max.
Weight 3.2kg

6-WAY LIGHT SEQUENCER
!
160_377
Larger picture 
6-WAY LIGHT SEQUENCER
  • Works as a running light or as a music controlled sound to light random effect via the built-in microphone (or both at the same time)
  • Sensitivity and speed are adjustable
  • On/off switch fitted
  • Supplied with 6 coloured reflector lamps
  • Packed in a see-through gift box
Power supply 230Vac, 50Hz
Lamp R80, 60W max.
Controller 6 x 60W max
Weight 3.2kg

LIGHT JUMPER 4
!
160_381
Larger picture 
LIGHT JUMPER 4
  • Supplied as a pre-assembled column with 4 lamp modules and a controller module
  • Works as a running light or as a music controlled sound to light random effect via the built-in microphone
  • Sensitivity and speed are adjustable
  • On/Off switch fitted
  • Supplied with 4 coloured reflector lamps
  • Packed in a see-through gift box
Power supply 230Vac, 50Hz
Lamp R80, 60W max.
Weight 3.2kg
Controller 4 x 60W max.

Octopod 30
!
30985_octopod_30
Larger picture 
30955

The Octopod intelligent LED color systems generate and control millions of colors and produce a wide variety of lighting effects. Chase, strobe and mix the colors of the Octopod’s eight LED fixtures in three operating modes lStand­alone, DMX or Sound-activated. This solid state lighting system is designed for easy installation and safe, energy­efficient, longlife operation. Each Pod can be controlled separately by DMX. By using multiple systems you can create a massive and colourful lightshow. Each systems comes with 8 Pods, the Pixel-Drive interface/power supply and all necessary cables.The Octopod is available in two versions

The Octopad 30 is equipped with Pods which contain 30 Leds each. This version is suitable for small venues and decrotive lighting

Zag Moon
!
30980
Larger picture 
30980
Moon Flower with 3 different LED colours, the colours change music controlled in RED, GREEN, BLUE and multi colour. Extreme long LED lifetime. No need for lamp change!

Aqualed
!
30981
Larger picture 
30981
A fancy novelty item with a very longlife time is this Aqualed. It projects almost real water reflections to your wall or ceiling. Because of the blue LEDs you never have to change the lamp again, due to the very long life time of the leds

Hex light Led
!
30982_zag_dot
Larger picture 
30982
A new compact version of this populr light effect unit.

 Rotating powerful light beams are projected from the

hexacon shaped unit and move to the music.

LED lighting no heat, unit doe,s not get hot.

Have a look at this unit in our demo room, customer feed back has been great.

Acme LED Boogie
!
boog01-wf0
Using the latest LED Technology and a superior optical system this Acme Boogie produces sharp red, green and blue beams of light. A lightshow like this can not be produced with traditional halogen lamps.

MarveLED
!
marv01-wf0
The MarveLED is from the next generation of affordable effects lighting. It replaces the traditional halogen lamp with LED's to produce a brilliant and bright effect with sharp beams and awesome colours. You will never have to replace a lamp again and it draws very little current. Also, DMX control lets you integrate it into and DMX lighting system. This is a UNIQUE and very COOL effect

Acme LED Dynamo
!
dyna06-wf0

Part Number Dyna06

The LED Dynamo Scanner is a stylish scanner with 46 pieces of high power LED's. The unit has a high light output and is very easy to use in either stand alone modes or via the optional CA-8 controller. The lightweight construction and low power consumption enables this scanner to suit many applications. All functions are controllable by DMX-512 or the scanner works in stand-alone mode with music activation.

LED Dynarock
!
dyna07-wf0

Part Number Dyna07

The LED DynaRock Barrel Scanner is a stylish scanner with 46 pieces of high power LED's. The unit has a high light output and is very easy to use in either stand alone modes or via the optional CA-8 controller. The lightweight construction and low power consumption enables this scanner to suit many applications. All functions are controllable by DMX-512 or the scanner works in stand-alone mode with music activation

Acme ImpossibLED
!
impo01-wf0

IMP001 Priced increased

In the past, LED lighting effects would only be used to project on walls. That is all about to change with the ImpossibLED. The unit is switchable between 10 and 4 DMX channels and creates spectacular firework-like projections. Individual control of each RGB colour, automated and sound-activated programming via Master/Slave or DMX with strobe and dimming are just some of the extensive features included in this unit

InvincibLED
!
invi01-wf0

INV102 Priced increased

Acme's NEW member of the LED family is the InvincibLED. This unique moonflower effect is a re-worked version of the popular Acme Skyray which was Prolight Concepts first ever lighting effect. Shooting pin sharp, laser-like beams of stunning colour, the special reflectors create a fast moving, constantly changing pattern that covers a wide area. Equipped with a high output 3 watt Tri-colour LED, the unit projects beams through the 6 lenses allowing the new InvincibLED to cover large areas of walls or ceilings. The unit also features a colour strobe effect to increase it’s visual excitement. On-board DMX brings the extra dimension of allowing users to create their own programmes with any standard DMX-512 controller. The InvincibLED is equipped with 3 DMX channels, which give users control over dimmer/strobe, LED colours and rotation.

LED ChromaPanel 600mm
!
j10589l
The ChromaPanel is a square colour mixing panel that utilises high-power LEDs to create a vivid panel of changing colour making it ideal for suspended ceilings or decorative wall or set displays. ChromaPanels are available in 600mm and 300mm sizes.
This product is RoHS compliant unless otherwise shown. a
5% discount for 3

LED Bank DMX-04
!
j33114l
This is a low energy 4-channel DMX-512 LED bank system for indoor use. With static colours and RGB colour mixing with or without DMX control, it offers blackout, static, dimmer and strobe options. Features include built-in automated programs and built-in sound activated programs, both via master/slave or DMX, whilst the additional slave output allows for colour-changing runway effect with up to 31 units. The light source is 304 100,000 hr LEDs (160 red, 72 green, 72 blue), the beam angle is 38° x 30° and the field angle 63° x 53°. Weighing just 3kg and with dimensions of 572mm x 146mm x 97mm, the fixture can also be controlled with the optional COLORstrip™ foot controller and is linkable with the COLORstrip™ LED linear wash light.

LED ChromaPanel 300mm
!
j10589l
The ChromaPanel is a square colour mixing panel that utilises high-power LEDs to create a vivid panel of changing colour making it ideal for suspended ceilings or decorative wall or set displays. ChromaPanels are available in 600mm and 300mm sizes.
This product is RoHS compliant unless otherwise shown.

Wash LED linear DMX-512
!
j48703l
This is a low energy 4-channel DMX-512 LED linear wash light for indoor use. With static colours and RGB colour mixing with or without DMX control or, it offers blackout, static, dimmer and strobe options. Features include built-in automated programs and built-in sound activated programs, both via master/slave or DMX, whilst the additional slave output allows for colour-changing runway effect with up to 31 units. The light source is 384 LEDs (128 red, 128 green, 128 blue), the beam angle is 63° x 29° and the field angle 82° x 52°. Weighing just 2kg and with dimensions of 965mm x 64mm x 152mm, the fixture can also be controlled with the optional COLORstrip™ foot controller and is linkable with the COLORbank™ LED bank system

Visio Colour Fusion CF-802
!
ledc02-wf1

Part Number Ledc02

The CF-802 system is specially designed for mobile applications. Due to
it's strong construction this unit can be used in the roughest of applications.

Each eye of the CF-802 can be controlled by DMX in order to create a massive lightshow with hardly any power consumption and virtually no heat. This version is suitable for small venues and decorative lighting

J Colourburst
!
ledj01-wf0

Part Number Ledj01

Colour Burst is a 4 channel, linkable DMX-512 fixture fitted with 86 bright red, green and blue light emitting diodes that produces a high output, richly colored spot suited for architectural and entertainment applications. It can produce a wide spectrum of colors via RGB mixing, static colors and a colour change program selectable speeds

LEDJ Blockbuster 8
!
ledj72-wf0

Part Number Ledj72

The BlockBuster 8 is a bank of 432 Ultra bright LED's which are grouped into 8 blocks, each contained in a heavy duty metal casing. Each block can be controlled independently and is made up from a mixture of red, green and blue ultra bright LED's. The BlockBuster can be used as a replacement for the traditional light box to create a stunning focal point