DMX CONTROLLERS
Click here to edit introduction
!

Control 54 ch dmx
!
154_050
Larger picture 

Part Number 154.050

54 Ch Digital DMX Contoller

54-CHANNEL DIGITAL DMX CONTROLLER

DMX512 controller for DMX light effects, dimmers and scanners.

  • For units with max. 6 channels
  • Clear LED display with indication of the active program
  • Speed and blending delay
  • Complete control via a microprocessor featuring a memory for 9 programs with max. 50 steps each
  • Output via XLR connectors
  • Mains adaptor and 1m XLR lead supplied
Power supply 9Vdc, 500mA
DMX connection 3-pin XLR
Dimensions 70 x 305 x 160mm
Weight 2.3kg

Control DMX Running Light 192
!
154_059
Larger picture 
Part Number 154.059

DMX OPERATOR RUNNING LIGHT CONTROL WITH 192 CHANNELS

Control panel for various DMX units. Clear LED display for black out, step, programming, music and automatic trigger setting.

  • Ideal to control up to 12 light effects with 16 channels max. each
  • Speed control from 0.1 second to 10 minutes
  • 30 memory banks that can store up to 8 programs (patterns) each selection among 6 different chases with upto 240 patterns each
  • Music controlled via a built-in microphone
  • Ideal for 19" panel mounting or as a stand-alone unit
  • MIDI connection facility (MIDI IN) to run the unit synchronous with your MIDI unit
  • Supplied with mains adaptor
Power supply 9Vdc, 300mA via mains adaptor
DMX connection 3-pin XLR
MIDI input 5-pin DIN
Dimensions 130 x 482 x 70mm (2U)
Weight 3.5kg

Control DMX 24 Ch
!
154_062
Larger picture 
Part Number 154.062

24-CHANNEL DMX LIGHT CONTROL PANEL

DMX light control panel featuring 24 channel to give you total control over your light effects.

  • 48 memories with a storage capacity for running light programs of up to 99 steps each
  • Numerous switch possibilities such as: up chase/down chase, single or mix chase dark, full on, fade, tap sync and hold
  • Control of the connected running lights via the music signal or manually
  • MIDI connection facility (MIDI IN) to run the unit synchronously with your MIDI unit
  • Speed setting for the running lights with a large control range
  • 24-channel dimmer control
  • Clear led indication of rec step, dimmer, speed time and fade time
  • Programmable up to 48 patterns (12 programs under 4 pages)
  • Facility for a foot switch (6.3mm stereo jack plug)
  • Ideal for 19" panel mounting or as a stand-alone unit
  • Mains adaptor supplied
Power supply 12Vdc, 500mA via mains adaptor
DMX connection 3-pin XLR
MIDI input 5-pin DIN
Audio input RCA, 100mV - 1V (p-p)
Dimensions 482 x 90 x 266mm (6U)
Weight 4.5kg

Fademaster16: 16 Channel DMX Controller

!
50406
This unit is ideal for laser or dimming units a 32 channel programmable DMX controller with the ability to program 12 scenes. Furthermore there is a built in chase, adjustable speed, chase direction and fade time. This light controller is the best solution for small light show's or test set-ups.

Technical Info:
• Total output channels: 16 x 2 (pages).
• Manual Mode.
• Built-in chase.
• Adjustable speed: 0,1 sec - 10 min.
• Adjustable fade time: 0-100 %.
• Output connector: 3 pole Female XLR.
• Dimensions: 540 x 100 x 190 mm (LxWxH). 
Part number 50406

Scene Setter 12 bank 24ch DMX
!
bote03-wf0
The Scene Setter is a 2-bank, 12 fader, 1-bank, 24 fader DMX mixing console. The Scene Setter has 4 pages to control up to 12 channels (single bank) or 24 channels (2 banks). The Scene Setter can program 48 scenes and 24 chases of 999 steps with a total of 2376 steps. Programs can be run automatically or by external or internal music input.

Trancension dc-2416 16ch
!
bote02-wf0
The Transcension DC-2416 Show Desk is a 16 channel dimming console and is fully DMX compatable. It has a built-in microphone for sound activated programs and also has an analogue output for a smoke machine. This 19" rack console is the perfect choice for on the road use or the smaller fixed installation.

The DC-8 is a eight channel lighting controller with a comprehensive array of built in patterns. With a total of 42 patterns and dimmer controls for each channel it provides an excellent varying lighting display from this easy and versatile control unit
!
bote09a-wf0
The DC-8 is a eight channel lighting controller with a comprehensive array of built in patterns. With a total of 42 patterns and dimmer controls for each channel it provides an excellent varying lighting display from this easy and versatile control unit

DC12
!
429_0_m
Larger picture 
BOTE9B PRO
12 channel DMX dimming chase controllers with 42 preset built-in programs.
For use with external DMX dimmer pack (supplied separately)

• Functions: Memory Backup / Hold Dimmer / Hold Sound / Prog Sound / Prog Speed / Auto Sound / Auto Speed / Memory / Fade Time / Full On and Stand-by
• Audio Control: Built-in microphone or line in DMX Output: 3 pin XLR female
• Power Input: DC 15-20V, 400mA min. (adaptor included)
• Dimensions: 482mm x 45 x 132mm
• Weight: 1.4Kg

Trancension SDC-6 DMX
!
bote16-wf0
The Transcension SDC-6 is a compact and portable 6-channel DMX controller. Powered by a 9V adapter or a simple battery (battery not included) this unit is convenient to carry and easy to operate. This is an ideal desk for use in small halls, schools and studios.

JC-1 64 ch Joy stick
!
bote01-wf0
The Transcension JC-1 is a 64-channel DMX controller which is ideal for the control of intelligent light fixtures: moving heads, scanners, gobo flowers and colour changers. This controller can control up to 8 intelligent fixtures with a maximum of 8 channels each. It can program up to 96 scenes and 4 programmable chases. The JC-1 controller is equipped with a compact flash reader and RS232 port. The programs can be run manually or sound activated by the built-in microphone. This controller is also fitted with an output to control a smoke machine.

Transcension DMX Operator 2 Controller
!
cont06-wf0
The DMX Master is a comprehensive lighting controller for up to 12 scanners with a maximum of 16 DMX addresses per scanner. 240 programmable scenes are available in 30 banks and 6 complete chase programs, the control unit has a speed control option and can also be set to audio synch operation. Full pan/tilt, black out, fade controls and 8 faders give maximum DMX capabilities. Midi interface, LCD display black-out and master control are also part of the vast array of functions that make this an excellent professional choice for a DMX lightshow

DVC2 GOLD
!
dasl03-wf0
DVC2 GOLD works with Virtual Controller 1, 2 and Virtual 3D software. This interface controls 2 x 512 DMX channels through the computer or 512 DMX channels in Stand Alone mode. The Stand Alone mode is easy to use and versatile : programme and load your scenes in the internal memory of the interface, power with an external 9-12Volt DC power source and select your scene using the buttons and it sends the DMX signals that you have pre-programmed to your lighting fixtures. The new Built-in CLOCK function is simply wonderful : you can trigger a scene when you want, tomorrow at 10 pm, next week, once a year, repeat the scene every hour, play it only 30 minutes, add few minute of show every days...

DVS 3D
!
dasl04-wf0

An economic 3D viewer with amazing rendering for any traditional lighting console.

The DVS 3D works with Virtual 3D software. This interface can take DMX input and Ethernet through the 3D software and must be connected to a PC. Links are established between fixtures-libraries and DMX channels. As a result, your 3D simulator and its DVC 512 IN interface are totally compatible with all DMX consoles available on the market. Software channels can be controlled externally through conventional DMX boards in real-time. Along with the interface comes a driver disk for Windows.

Dmx controller software PC
!
L381660A
Larger picture 

Part Number DMX120

DMX controller + software 120 channels sound etc

DMX controller,
consisting of software for DMX controllers and DMX converter box.

Features of software for the controller
  • Graphic surface, easy to operate
  • 120 DMX control channels (DMX-120), 60 DMX control channels (DMX-60)
  • 10 operating levels with 12 channel faders each for adjusting the DMX parameters, 1 flash button for each channel fader
  • 1 master fader, can be assigned to each channel as desired
  • 500 programmable scenes can be stored per block
  • Different blocks of scenes can be combined
  • Stored scenes can also be called up via keyboard
  • Automatic run of 4 parallel sequences with up to 500 scenes each
  • 10 groups can be stored with up to 20 channels each
  • Blackout function
  • Channel inversion
  • Any number of synchronous groups can be created
  • Libraries can be created for every DMX unit (features of the unit like gobos and colour wheel)
  • Libraries are available for every DMX unit from IMG Stage Line
  • Music-controlled scenes and sequences via sound card
  • Manual input of beat for controlling scenes and sequences
  • German, English, French, and Spanish version

HEAVY DUTY 6-CHANNEL DMX/ANALOGUE DIMMER CONTROL
!
154086w

HEAVY DUTY 6-CHANNEL DMX/ANALOGUE DIMMER CONTROL

6-channel dimmer control suitable for DMX512 or analogue 0-10V control. Convenient for professional applications due to the heavy-duty 20 Amp outputs.

  • Each output can be controlled separately and is fitted with an automatic safety provision with indicator lamp
  • Lamp pre-heating adjustable up to 50%
  • Power supply 230V single-phase or 230/400V three-phase for extreme loads
  • Connections via screw terminals
  • DMX in/out connections via 3-pin XLR connectors. Analogue connections via 8-pin DIN plugs
  • Fan cooled
  • 19" rack mountable
Power supply 230Vac/400Vac
Current per channel 10A max.
Max. load 60A
Dimensions 89 x 482 x 430mm
Weight 8.8kg